Description
Forest 6′ x 5′ Pressure Treated Contemporary Double Slatted Fence Panel offers privacy, airflow and a modern look, with PEFC timber and a 15-year anti-rot guarantee.
38% OFF: Forest 6′ x 5′ Pressure Treated Contemporary Double Slatted Fence Panel (1.8m x 1.51m)
38% OFF: Forest 6′ x 5′ Pressure Treated Contemporary Double Slatted Fence Panel (1.8m x 1.51m) is a practical choice if you want fencing that does more than just mark a boundary. It gives you a neat, contemporary look, while still allowing natural light and airflow through the garden. That mix is one of the main reasons people go for double slatted panels in the first place. You get privacy without turning the whole space into a dark box, and that matters more than you might think once the fence is up.
This panel is made from pressure-treated timber and comes with a 15-year anti-rot guarantee, so there is no need for further treatment after fitting. For many buyers, that is a real plus because it saves time and a bit of hassle too. The timber is also PEFC-certified, which means it comes from sustainable, well-managed forests. If you are trying to choose fencing with some thought behind it, that detail is worth noting.
A Contemporary Fence Panel That Still Feels Like Timber
Some modern fence panels can look a bit too polished or plain, almost like they belong outside a showroom rather than in a normal garden. This one keeps the timber feel, but with a more updated style. The design uses rounded horizontal slats mounted to both the front and rear of vertical battens. That creates the double-slatted effect and gives the panel a more structured appearance than standard closeboard fencing.
The slats also have a smooth-planed finish, which gives the panel a cleaner look and a more pleasant feel when viewed up close. It is the sort of detail that makes a difference when the fencing is visible from a patio, seating area or side return. You do not need to be a garden expert to see that it has been made with appearance in mind.
Why Buyers Choose Double Slatted Fencing
One of the main advantages of a double slatted fence panel is the balance between privacy and openness. A solid fence can block sightlines, but it can also make a garden feel enclosed. On the other hand, very open fencing may not give enough screening. This panel sits somewhere in the middle.
The spacing between the slats allows for air movement and some light to pass through, while still giving a sense of screening. That makes it suitable for a range of uses, including:
- Garden boundaries
- Partitioning within the garden
- Screening off seating or utility areas
- Creating a cleaner backdrop for planting
It is a flexible design, and that is a big part of the appeal. You are not locked into one single use. If your garden layout changes later, the panel should still work just fine in another part of the space.
Material and Build: What You Are Actually Getting
When people look at fencing, they often focus on style first. Fair enough. But the build details matter too, because fencing sits outside all year and takes a lot of weather. This panel is made from pressure-treated timber, which helps protect it from rot and decay. That treatment means the wood has already been prepared for outdoor use, so you do not need to add more treatment straight away.
The timber is PEFC-certified, so the source of the wood is traceable and linked to sustainable forestry standards. That will matter more to some buyers than others, but it is useful to know if you care about where garden materials come from.
The panel size is 6′ x 5′ (1.8m x 1.51m), which makes it a handy mid-height option for many gardens. It is tall enough to provide a decent level of screening, while still keeping the space from feeling overly shut in. If you need different heights, this contemporary range is also available in 3ft, 4ft, 5ft and 6ft versions.
Slat Size, Spacing and the Feel of the Finish
Some fencing is attractive from a distance, but looks a bit rough once you stand near it. The details here help avoid that. The slats are 45mm x 8mm, with 14mm space between individual slats. That spacing is part of what gives the panel its airy look, rather than making it seem like a solid wall of timber.
The rounded edges and smooth-planed finish also help the panel look more finished and less bulky. That can be useful if the fence runs alongside a terrace, a path or an area where the timber will be seen every day. It is the kind of fencing that sits quietly in the background, but still improves the overall feel of the garden.
Privacy Without Losing the Garden Feel
A lot of buyers want privacy, but they do not necessarily want to block everything out. This is where the double slatted design is useful. Because the panels are built with slats on both sides of the battens, they provide a screened effect that still lets the garden breathe a bit. The result is more balanced than a plain board fence.
That can be particularly helpful in smaller gardens, where heavy fencing might make the area feel reduced. It also works well in modern outdoor spaces where clean lines and layered textures are important. If you are planning a seating area or outdoor dining spot, this panel can help define the zone without making it feel boxed in.
A Good Fit for Different Garden Setups
Not every fence panel works in every setting, but this one is fairly adaptable. It can be used as a main garden boundary, and it also works well as a screen between sections of the garden. That means you could use it to hide bins, separate a vegetable patch from the lawn, or create a bit more shelter around a patio.
The panel can be installed with or without gravel boards, depending on how you want the finished run to look and how your posts are set up. Gravel boards can help keep the timber away from direct ground contact, which is often useful in damp areas. But the panel is still suitable as part of a standard fencing run too.
Installation Notes That Are Worth Knowing
Before buying fencing, it helps to think through how it will be fitted. This panel can be slotted into timber or concrete H-slot fence posts. It can also be mounted to the front of the posts if you want the look of an unbroken run, with the posts sitting behind the panels. That creates a cleaner finish along the line of the fence.
The installation guidance suggests that you pre-drill the frame at the top, centre and bottom, then screw through into the post. If the panels are being fitted between timber posts, you can use the same pre-drilling and screw method, or fit them with U-brackets (FXU25). It is always worth checking the setup before starting, because getting the posts right makes the rest easier.
A small note here: planning the height, post centres and ground level before you begin can save a lot of back-and-forth later. It sounds obvious, but people do forget that sort of thing when they are keen to get on with the job.
Less Maintenance, More Time for the Garden
One of the stronger practical points is that the panel is pressure-treated and protected by a 15-year anti-rot guarantee. That means no further treatment is required straight after installation. For many buyers, that is a big part of the decision because it reduces upkeep at the start.
Of course, all timber fencing will need some care over time if you want it to stay looking good. But starting with pressure-treated timber gives you a better base. It is one less job on the list, and garden projects always seem to have enough jobs already.
When You Want Fencing That Looks Planned
There is something about a well-matched fence that makes a garden feel more settled. This panel gives a tidy, contemporary look without being overly decorative. That makes it useful if your garden already has modern paving, rendered walls or simple planting. It ties in without taking over.
It can also work nicely behind shrubs, planters and climbers. Because the slatted design is not completely solid, the panel can act as a backdrop without looking too heavy behind softer planting. That can help create depth in the garden, which is often what people are after even if they do not say it that way.
Available Heights for Different Needs
This particular model is the 6ft x 5ft panel, but the range also includes 3ft, 4ft, 5ft and 6ft high versions. That is useful if you need to match an existing boundary or create different levels across the garden. Some customers prefer lower panels near the front or side, then taller screening further back. Having those options in the same style makes planning much easier.
If you are replacing only part of a run, checking the height of neighbouring panels before ordering is a sensible step. It saves awkward mismatches and means the finished line looks intentional rather than patched together.
Free Delivery and a Straightforward Buy
Another practical benefit is that delivery is free to most UK addresses on orders over £100. For larger fencing projects, that can help keep the overall spend under control. Fencing is one of those purchases where the product price is only part of the picture, so delivery terms matter more than some people expect.
Because this is a garden boundary item, it is also worth thinking ahead about access for delivery and storage. Panels are easier to handle when there is space to place them flat and dry before fitting. Not glamorous, sure, but useful.
Is This the Right Panel for Your Garden?
If you want a fence panel that gives a modern finish, useful screening and solid build quality, this one fits the brief well. The pressure-treated timber, PEFC certification and anti-rot guarantee give it a practical edge, while the double slatted design keeps it looking lighter than a full privacy fence.
It is a good choice for homeowners who want fencing that feels current without being too bold. It can sit comfortably in a family garden, a side return, a patio edge or as part of a larger boundary run. And because it needs no further treatment at the start, it is quite a straightforward option too.
Key Features at a Glance
- Size: 6′ x 5′ (1.8m x 1.51m)
- Material: Pressure-treated timber
- Certification: PEFC-certified timber
- Guarantee: 15-year anti-rot guarantee
- Design: Horizontal rounded slats on front and rear vertical battens
- Finish: Smooth-planed slats with rounded edges
- Slat size: 45mm x 8mm
- Spacing: 14mm between slats
- Use: Screening, partitioning or garden boundary
- Heights available: 3ft, 4ft, 5ft and 6ft
- Delivery: Free to most UK addresses on orders over £100
Final Thoughts Before You Order
The Forest 6′ x 5′ Pressure Treated Contemporary Double Slatted Fence Panel is the sort of product that makes sense when you look at it properly. It gives privacy, but not too much. It looks modern, but still natural. It is treated, certified and backed by a long guarantee, which makes it easier to choose with confidence.
If you are comparing fence panels and want something that feels a bit more considered than standard timber fencing, this one is worth a close look. It works as a screen, a boundary or a divider, and it brings a neat finish to a garden without asking for extra treatment right away. For many buyers, that balance is exactly what they are after.
Buy here with discount and give your garden a fencing run that is practical, tidy and ready for everyday use.