34% OFF: Forest 6′ x 4′ Pressure Treated Contemporary Double Slatted Fence Panel (1.8m x 1.21m)

£84.99

✿ buy here with discount! ✿

    The Forest 6′ x 4′ (1.8m x 1.21m) Pressure Treated Contemporary Double Slatted Fence Panel is strong, stylish and comes with a fantastic 15-year anti-rot guarantee. Suitable for use as screening, partitioning or as a main garden boundary, this is an excellent example of modern garden fencing at its finest. Constructed from rounded horizontal slats, mounted to both the front and rear of vertical battens, these slatted fence panels are built to last. What’s more, all of the slats enjoy a beautiful smooth-planed finish, which makes for an extremely attractive appearance. The design of this 6×4 fence panel offers a garden natural light and airflow, while still marking a clear boundary. It works extremely well in a wide range of settings, including as a low-level boundary, an effective partition within the garden, or mounted on top of a wall. Pressure-treated and backed by a fantastic 15-year anti-rot guarantee, no further treatment is required, saving both time and money. All of the timber is PEFC-certified, so only sourced from sustainable, well-managed forests. This contemporary fence panel is available as a 3ft, 4ft, 5ft or 6ft-high model. Delivery is free to most UK addresses on orders over £100. Installation recommendations for Forest Garden Double Slatted Panels: The panels can be slotted into timber or concrete H-slot fence posts. The panels can be mounted to the front of the posts to give the effect of an unbroken run. The posts will sit behind the panels. Pre-drill the frame at the top, centre and bottom. Screw through into the post. The panels can be mounted between timber posts using pre-drilling and screws as suggested before or by using U-brackets (FXU25). 15-year anti-rot guarantee Pressure-treated PEFC-certified timber Horizontal slats mounted to the front and rear of vertical battens Slats have rounded edges and a smooth-planed finish Offers natural light, airflow AND a clear garden boundary 45mm x 8mm slats (space between individual slats 14mm) Available 3ft, 4ft, 5ft and 6ft-high Free delivery to most UK addresses on orders over £100

✿ buy here with discount! ✿

Description

34% OFF Forest 6′ x 4′ Pressure Treated Contemporary Double Slatted Fence Panel (1.8m x 1.21m) for modern garden screening, partitioning and boundary use. 15-year anti-rot guarantee, PEFC timber, smooth-planed slats and free delivery on eligible UK orders over £100.

Modern fencing with a practical edge

If you are looking for a fence panel that does more than just draw a line around the garden, the Forest 6′ x 4′ Pressure Treated Contemporary Double Slatted Fence Panel is worth a closer look. It is designed for people who want a neat, current look without losing the useful side of fencing. You get a panel that can work as a boundary, a screen, or a section divider, while still letting some light and air pass through. That makes it a good fit for a range of gardens, from compact outdoor spaces to longer runs where you want the place to feel less closed in.

The panel measures 1.8m x 1.21m / 6′ x 4′, so it sits comfortably in a lot of common fencing layouts. It also comes in other heights, which is handy if you are trying to match existing fencing or build up a run at different levels. Not every garden needs a tall solid wall of timber, and this design keeps things feeling open while still marking the space clearly.

What makes the double slatted design different?

The main feature here is the horizontal slat layout. The rounded slats are mounted to both the front and rear of the vertical battens, which gives the panel a contemporary finish and a bit more depth than a basic closeboard style. This double slatted build is part of why the panel looks tidy from a distance and still has a defined shape up close.

There is also a practical benefit to the spacing. The panel offers natural light and airflow, which can make a garden feel less boxed in. That can matter more than people sometimes think. In a seating area, for example, you still get some privacy without cutting off the whole view. In a side return or between garden sections, it can act as a screen without making the area feel heavy.

The slats themselves are 45mm x 8mm, with 14mm gaps between each one. That spacing helps give the panel its balanced look. It is not a full privacy fence, but it does give a clear boundary and a more stylish feel than a plain boarded option.

Materials and finish that make sense for everyday use

This fence panel is made from pressure-treated timber, which is an important point if you want something that can handle outdoor conditions better over time. Pressure treatment helps protect the wood against rot, so it is not something you need to keep treating straight away after fitting. That saves a bit of work, and for many buyers, it also means less cost and less fuss later on.

The timber is also PEFC-certified, which means it is sourced from sustainable, well-managed forests. If you are trying to buy with the garden and the wider environment in mind, this is a useful bit of detail rather than just a label on the page.

The slats have a smooth-planed finish with rounded edges. That gives the panel a cleaner look and makes it feel a little more refined than rough sawn timber. It is the sort of detail you might not notice first, but you probably would if you placed it next to a more basic fence. The finish helps the panel sit well in modern gardens, but it is still simple enough to work with more traditional spaces too.

A fence panel with a clear job to do

There are several ways this panel can be used, and that is one of its main advantages. It can be fitted as a main garden boundary, used for screening, or installed as a partition within the garden. It can also be mounted on top of a wall, which is useful if you need extra height without starting from scratch.

That flexibility is helpful if your garden is doing more than one thing. Many outdoor spaces now need to feel like somewhere to sit, somewhere for children to play, and maybe somewhere to keep bins, tools, or a less tidy corner out of sight. A panel like this can help divide those areas without making them feel shut off.

Because it is a contemporary double slatted fence panel, it suits gardens where the aim is a cleaner, more planned appearance. It does not try too hard. It just gives a neat structure that feels current and works in day-to-day use.

Pressure treated and ready for the weather

One of the biggest points in this panel’s favour is that it comes pressure-treated and includes a 15-year anti-rot guarantee. For a lot of people, that changes the buying decision quite a bit. It means you are not starting with untreated timber that needs immediate attention. You can fit it and get on with the rest of the garden jobs.

Of course, timber is timber, and outdoor products still need the right fixing and fitting if you want them to last properly. But having that treatment already in place does remove some of the usual maintenance pressure. It is the sort of thing that can make the difference between a fence job you keep putting off and one that actually gets finished.

It also means this panel can fit neatly into a longer-term garden plan. If you are updating the whole boundary, or even just replacing a few worn panels, it is useful to know the timber has been prepared with outdoor use in mind.

Sizes and layout options

The 6′ x 4′ size is only one option in the range. This contemporary panel is also available as a 3ft, 4ft, 5ft and 6ft-high model. That gives you more room to plan your fencing properly, especially if you need to mix heights for privacy, design, or existing wall levels.

Lower panels can work well in front gardens or in areas where you want to keep the view open. Taller versions may suit side boundaries or spaces where you want a stronger visual screen. Having the choice is helpful, because not every part of a garden needs the same treatment.

If you are replacing old panels, it is worth checking the heights you already have in place before ordering. A quick measure now can save a bit of hassle later on. And yes, it sounds obvious, but people do get caught out by this more often than they’d like.

Installation notes that are worth knowing

The panel can be installed in a few different ways. According to the fitting guidance, the panels can be slotted into timber or concrete H-slot fence posts. They can also be mounted to the front of the posts to create the effect of an unbroken run, with the posts sitting behind the panels.

For fixing, the instructions suggest pre-drilling the frame at the top, centre and bottom, then screwing through into the post. This is a sensible approach because it helps reduce the chance of splitting and gives a more secure hold. The panels can also be mounted between timber posts using pre-drilling and screws, or by using U-brackets (FXU25).

If you are not sure about your setup, it is usually best to check your post type and spacing before ordering. The fitting method matters just as much as the panel itself. A well-made panel can still look off if it is forced into a space that is too tight or left unsupported.

Why buyers tend to choose this style

There is a reason contemporary slatted fencing keeps showing up in garden projects. It offers a more open feel than a solid closeboard panel, but it still gives a clear line and a good sense of structure. In smaller gardens, that can help the space feel less enclosed. In larger ones, it can give different areas a bit more definition.

This panel also works if you want something that looks tidy from both sides. Because the slats are mounted front and back, the appearance is more finished than some simpler designs. That can matter if the panel will be visible from neighbouring properties or from inside the garden itself.

Another point in its favour is that it does not ask for immediate treatment after fitting. For anyone who prefers low-maintenance outdoor materials, that is a useful thing. It will still need normal care over time, like any timber product, but it is already prepared for outdoor use.

Good for screening without blocking everything out

Some fencing jobs need full privacy. Others do not. This panel sits in the middle. It gives enough cover to screen off areas you would rather not have on display, but it still allows light and air through. That can be a nicer balance for patios, seating corners, and garden divides.

It can also be useful where you want to soften the look of the boundary. A solid wall of timber can feel heavy. A slatted pattern gives more texture and movement, and that can work nicely with planting, gravel, paving, or decking. If you like the garden to feel ordered but not too closed in, this style makes sense.

Useful details at a glance

  • Product: Forest 6′ x 4′ Pressure Treated Contemporary Double Slatted Fence Panel
  • Size: 1.8m x 1.21m / 6′ x 4′
  • Material: Pressure-treated timber
  • Certification: PEFC-certified timber
  • Guarantee: 15-year anti-rot guarantee
  • Slat size: 45mm x 8mm
  • Gap between slats: 14mm
  • Finish: Smooth-planed, rounded edges
  • Available heights: 3ft, 4ft, 5ft, 6ft
  • Delivery: Free to most UK addresses on orders over £100

Delivery and value for money

The current offer shows 34% OFF, which makes this panel easier to fit into a garden project budget. Fence panels often have a way of adding up once you need several of them, so any discount can help. If you are ordering enough to pass the free delivery threshold, that is another thing that can keep the total cost in check.

For buyers comparing different fencing styles, it is worth looking beyond the initial price and thinking about what is included. A pressure-treated panel with a long anti-rot guarantee and PEFC timber can offer a more straightforward path than something cheaper that needs more work later. It is not just about the first spend, it is about how the panel fits into the next few years of garden use.

Who this panel suits best

This fence panel is a good match for people who want a modern garden look without going too far into a fully closed design. It suits buyers who want a boundary with a bit of breathing room, and those who like the idea of adding screening without losing the open feel of the garden.

It is also useful for anyone replacing older panels with something that feels more up to date. If your current fencing is tired, warped, or just no longer works with the rest of the garden, a panel like this can make a noticeable difference without changing everything else around it.

And if you are planning the garden in stages, this style gives you room to build around it. You can add planting, lighting, or paving later, and the fencing still holds the space together nicely.

A simple choice that does a lot of the work

The Forest 6′ x 4′ Pressure Treated Contemporary Double Slatted Fence Panel brings together useful details that matter in real gardens: a pressure-treated finish, a 15-year anti-rot guarantee, PEFC-certified timber, a smooth-planed look, and a design that balances privacy with airflow. It is not trying to be more than it is. It is a practical panel with a current appearance and a few thoughtful features that make it easier to live with.

If you want fencing that looks neat, feels considered, and can be used in different parts of the garden, this panel is a solid option to look at. It works well as part of a full boundary or as a sectioned-off screen, and because it comes in several heights, it gives you a bit of flexibility too. That can make planning the garden less awkward, which is always a plus.

For shoppers after a contemporary fencing option with useful details and a fair amount of versatility, this panel is an easy one to shortlist. Not flashy, not overdone, just a well-judged garden fence panel that should fit into plenty of outdoor spaces.